Select Language
   
Products
ALC5624
Handheld Multimedia I2S Audio Codec
 
General Description
The ALC5624 is a highly-integrated I2S/PCM interface audio codec with multiple input/output ports and is designed for mobile computing and communications. It provides a stereo DAC for playback, and a stereo ADC for recording via the I2S/PCM interface.

Stereo audio functions are supported via the I2S/PCM configurable interface. To reduce component count, the device can connect directly to:
  • MONO or stereo differential analog inputs
  • Stereo headphone
  • Single-end or BTL MONO output
  • MONO or Stereo Bridge-Tied Load (BTL) speaker

    Multiple analog input and output pins are provided for seamless integration with analog connected wireless communication devices. Differential input/output connections efficiently reduce noise interference, providing better sound quality. Class-AB or Class-D amplifiers are easily swapped via simple register configuration, and the 1 Watt speaker removes the need for an additional amplifier, further cutting both cost and required board area. Additionally, a flexible hardware 5-band equalizer with configurable gain, bandwidth, and center frequency, and enriches the sound experience.

    To extend battery life, each section of the device can be powered down individually under software control. Leakage current in maximum power saving state is less than 10µA. The ALC5624 digital power operates at supply voltages from 1.8 to 3.6Volts, analog power operates at supply voltages from 2.3 to 3.6Volts, and speaker power operates from 2.3V to 5V.

    The ALC5624 is available in a 7x7mm ‘Green’ QFN package, making it ideal for use in handheld portable systems.
  •  
    Features
    • High Performance I2S Codec
      • 16-bit stereo DAC SNR 90dB, THD+N -85dB
      • 16-bit stereo ADC SNR 85dB, THD+N -80dB
    • One analog stereo input (LINE-IN)
    • One analog MONO single-ended or differential input (PHONE and PHONEN input)
    • Stereo, single-ended MONO, or differential analog microphone inputs, with boost pre-amplifiers (+20/+30/+40dB)
    • BTL (Bridge-Tied Load) Max. output with on-chip 1W speaker driver (SPKVDD=5V, 8Ω load)
    • Stereo headphone output with on-chip 45mW headphone driver (HPVDD=3.3V, 16Ω load)
    • 25mW SE or 75mW BTL MONO output support (AVDD=3.3V, 32Ω load)
    • Microphone switch detection
    • Power management and enhanced power saving
    • Supports digital 5 band equalizer (EQ)
    • Supports digital spatial sound and pseudo stereo effect
    • Supports pop noise suppression
    • Internal PLL can receive wide range of clock input (Digital IO power > 1.8V)
    • Digital power supplies from 1.8V to 3.6V, speaker amplifier power supplies from 2.3V to 5V
    • Analog power and headphone power supplies from 2.3V to 3.6V
    • 7 x 7mm 48-pin QFN package
    Applications
    • Tablet PC system/Ultra-Mobile PC (UMPC)
    • GPS/Personal Navigation Device (PND) or Multi-Media phone
    • PDA Phone/Smartphone
    • Personal Media Player (PMP)
    Download Page Links
    Datasheets

     

    TOP.... HOME
     
    Realtek to Demonstrate Full Range of Connectivity, Multimedia, and Consumer Electronics Solutions at 2018 CES
    Realtek to Demonstrate Full Range of Connectivity, Multimedia, and Consumer Electronics Solutions at 2017 CES
    Realtek PCIe GBE Family Controller Series Drivers
    Realtek PCIe FE Family Controller Series Drivers
    HD Audio Codec Driver
    Monthly Revenue Update
    M.O.P.S.
     
    About Realtek | Products | Press Room | Downloads | Investor Relations | Employment | Contact Us | FAQs | Site Map
    Contact the Webmaster about any website related problems.
    Best viewed at 800x600 with
    IE 6.0 or Netscape 7.02 or Mozilla Firefox 1.0.6 or higher.
    ©2018 Realtek Semiconductor Corp. All rights reserved.